Top-Rated AC Repair in North Redington Beach, FL

Task Includes -Installation of 3 Ton Carrier Heat Pump -Installation of new return air plenum -Installation of new wood deck stand or aluminum -Adding additional 40ft of copper Lineset with control wire. -10 year parts 1 year Mason Air labor warranty -All permits and inspections included

Performed maintenance everything is working normally continue with maintenance needed

Returned and started up both systems There is no 120v receptacles with power yet for condensate pumps. Will need an extension cord ran to power pumps while ac is running. Disconnected power to systems until that point arises. Installers need to return tomorrow to finish duct work appears to have 3-4 boot boxes that need to be installed to Sheetrock. Also need to bring copper insulation to insulate at air handler

Na

Sent estimate for new 3.5 ton

Found system running with low suction pressures low superheat and extremely cold suction line. I upped the fan speed to try to accommodate for the issues but due believe the txv is burnt and the filter dryer needs replacing. When the next procedure is done we need to r11 flush the line set.

Arrived on site checked system and pressures, all seems to be working

Txv/hard start kit/Capacitor 40/5

AC is freezing up, getting very low suction pressure and normal high side pressure. There is a restriction in TXV. Also outdoor capacitor is very weak and compressor has high startup amps. There is also forms of biological growth inside of blower cavity. Gave client solutions for issues with system. Client chose to go with solution number two. Ordered a new TXV and need to return when part comes in. Also need to replace 40+5 dual run capacitor and 1-3 ton hard star kit.

Gave client quote for new 3 ton Goodman Heat pump system Also gave quote for dual port Daikin mini split

Task Includes -Replacement of all supply air lines -Replacement of all can stock to ceilings -Adding (2) supply air ducts with can stock and grills for 3 ton system -Adding (1) supply air duct can stock and grill for 2 ton -Running new exhaust duct for bathroom fans

Task Includes -Installation of 2 Ton Carrier Crossover Inverter Heat Pump -Installation of 3 Ton Carrier Crossover Inverter Heat Pump -(2) Carrier Eco Bee thermostats -Installing both air handlers on metal open stands in closets pictured -(1) 24x20 stamp face return for 3 Ton -All new copper linesets with control wire -(2) Condensate pumps -(2) New supply plenums with duct modifications -Hanging condensers on Air Brace wall brackets as pictured and to code requirements -Nitrogen braze, nitrogen test, code required vacuum, and additional Freon if needed -10 year parts 1 year labor warranty -All permits and inspections included

Client invested in new duct system for his 3 ton and 2 ton systems in home Will be adding 3 supply’s in home. Will be demoing all duct work new can stock with supply flex. Insulation blow in and running exhaust flex is free with quote

Quoted client for installation of just air brace wall brackets to be installed Also while on site discussed with client on carrier crossover inverters to be installed due to application and code requirements. If client chooses to have systems installed we will be hanging condensers on the wall and strapping down to air brace brackets to code requirements. Air handlers are being converted into closets and will need to be on open stands. Both air handlers will condensate into pumps due to new applications. Advised all new copper linesets and control wire to be ran due to salt water corrosion and peak efficiency of high seer equipment. Both air handlers will need new supply plenums and some supply duct work modifications after installation. Please see attached pics for system placements. Sent estimates over for Mr. Ford to view and awaiting for further approvals.

Replaced full system condenser and Air handler

Brennan G Today I returned to install a condensate pump and run the discharge line outside. I preformed and completed the quoted work. The system is now draining normally.

Brennan G Today I visited for the condensate line being clogged. I preformed extensive drian flush and was unable to get the line cleared. I emailed estimates for a condensate pump to be installed. We scheduled the new condensate pump to be installed 2-4 on Monday.

Found unit 501 severely over charged. Please see attached pics for before and after. System now performing as designed

Arrived to find system completely out of Freon Pressure tested system with nitrogen Found hole in condenser coil Quoted client for repair vs replacement Honored price from neighbors system that was installed yesterday Took deposits via phone by CC Please contact Mrs Jan for scheduling

Task Includes -Replacement of existing 3 ton heat pump with new -Connecting to existing copper line set, duct work, and Electrical

New Air Handler New Condenser 10 year parts warranty 1 year Labor and maintenance

This job had to be recreated so that we can book the right location for the install that James sold

Brennan G Today I visited to veiw the jobsite and determine what work will be involved with replacing the AC system. We will need power supplied to the building before we can begin the installation. By this time the Crane that is onsite will be gone and we will need to have our own crane onsite. We collected a deposit for the work to be preformed. The remainder due upon job completion.

Brennan G We are unable to aquire a replacement condenser to match the existing air handler. Here is a quote for an entire replacement system Financing is available.

Brennan G Today I visited to inspect the Ac systems after they were flooded from the hurricane waters. Both systems were submerged in salt water and will need to be replaced. The aluminum coil fins will corrode rapidly due to the salt water. I provided an estimate to replace both systems.