Reliable AC Repair Services in Lutz, FL

Client 5 ton Lennox system compressor failure causing main breaker to trip I went over options in clients monthly budget and total cost budget I emailed estimates clients will make decision next couple,e of days needs to discuss options with wife

Technician: Josh S Phone #: 980-829-5627 Discussed replacement of 3.5T Gas Furnace. Client wishes to discuss with spouse.

She had questions about why Titko raised her electric bill and what the cost difference was with a higher efficiency system, but there’s nothing I can do the system take or raise the rates on the kilowatt usage which made her Bill be a lot higher than what she’s expecting

Shut up to do a diagnostic on the system went through both systems. First system is a train 2000 1518 zero unit run cap was 39 over4 on the capacitor. It calls for 50 over five that I advise the homeowner that it is weak he is aware of that situation. I would recommend a run cap and a hard start for that system to improve the quality of that machine and it’s life. Second system is a carrier run cap was 27 over4.96 MFD run cap on that system is 30 over five to improve the quality of that machine. I recommend a hard start systems are both operating. I did advise though that run cap once it becomes weak enough it won’t allow the compressor to kick on for the train system. Homeowner is aware gave him five different quotes on Repair repairs versus replaced the system. Homeowner needs to talk to his wife and he’ll get back to us on that end paid 135 for the diagnostic today.

A/C Compressor

Estimates provided. Discussed clients needs and expectations from duct cleaning. Home has two central HVAC systems with independent ducting. Advised client on effectiveness of ultraviolet systems in maintaining a clean and healthy home. Outlined ultraviolet products available and functions of each. Provided estimates for duct cleaning as well as both stage 1 & 2 Ultraviolet systems. Recommended enrollment in Prime Maintenance Plan to provide regular inspection, testing, and cleaning of HVAC systems as well as plumbing and electrical service. Client chose to proceed with duct cleaning only at this time. Deposit of $650 collected via cc, balance to be collected on day of service. Please schedule for early next week.

Clean and treat drain

Came out for machine estimate upon arrival customer has two more company’s coming out and at this moment he wants a carrier straight cool under 7900. He has one more estimate tomorrow at 1pm so I told him I would call him after

Performed system maintenance. Found In Duct Air Purifier due for replacement. System operating slightly under charge. Suggest to replace ai cell replacement bulb and adjust the refrigerant charge by approximately 1 lb. System has 4" media filter and a 1" filter present in return. Suggest using a less restricted filter for 1" grill inside of the home.

Diagnostic completed. Found temperature drop across home an average of 12°f. Liquid pressure at condenser nearly 480psig. Condensing Coil significantly impacted from nearby dryer vent. Client approved deep coil cleaning. Disassembled condenser and cleaned coil. Found condenser fan blade cracked at rivets, this poses significant risk to condenser and should be replaced. After coil cleaning temperature drop improved to 14°. Advised client that system is aging and to improve delta further would require investment which is not worth spending on older equipment. Recommended replacing fan blade. Client states he has several Carrier condenser fan blades he could install on condenser, advised against using non-oem blade as component is model specific for CFM and condenser design. Correct requests price adjustment by management. Email provided and payment link requested. No further action necessary. Email: amitabh_prasad@verizon.net

Came out for machine, not cooling properly. Upon arrival. Customer had a buddy of a friend that is a repair guy come by and check over the unit to verify that the condenser outside is currently not working and has a failed compressor and other parts he was recommended to completely replace the condenser. My only concern is it’s a 410 a Bryant. I do not know if it is available. I need to wait until Monday to check to see if I can order that and where it’s available at because currently they have no AC at all. Also showed customers options a full replacement customer would like to sit and talk with his wife tonight before making a decision.

Checked operations of both systems, coils, amps, wiring, capacitors all good, cleaned drains lines and condensation pump, washed out condensers, talked to customer about hole in the closet which he will be getting repaired. Both systems running well at this time

Preformed maintenance on both systems, installed floats as requested. Both systems in good condition, cabinets are clean, uv lights are good. Found no burnt wires or loose connections, amps, charge, coils are all good, cleaned out condensers, vacuum pumped both drain lines, both systems are good to go!

Cleaned drain line. Cleaned coils. Checked freon pressures. Tstat was reaching desired temperature.

Found system running low on refrigerant not able to keep up. Upon leak detection could not pinpoint leak to inside or outside. Recommend replacing for 10 year warranty coverage and higher efficiency.

Cleaned drain line. Float switch was tripped

Client said system was having issues cooling. After doing a full diagnostic including checking refrigerant pressures and temperatures, condensate line, all major and minor electrical components, and supply and return temperatures there were no issues discovered. System is running optimally, however It is recommended to add surge protectors to both outdoor units.

Brennan G Today I visited for the system not cooling or heating. We discovered the compressor fan capacitor had failed. We replaced the faulty component and installed a compressor start assist. The system is now operational. We enrolled the system into our maintenance agreement and i install a client supplied thermostat. I plan to return this week with the correct size capacitor and preform the first maintenance visit.

Task Includes -Installation of 15 SEER2 4 Ton Carrier Heat Pump System -Relocating air handler to garage -New insulated large stand -New supply and return plenums -Demo electrical sub box in existing air handler closet -New electrical for air handler -New electrical line for condenser. -Running new drain line for new air handler location. -Replacement of 9 supply air lines and adding 1 supply air in future -10 year parts 1 year labor warranty -All permits and inspections included

Upon arrival Shawn stated system was going out on high pressure lock out. Investigated system to find head pressure too high for conditions outside. Removed charge until head pressure was in my option resonable for conditions outside. Advised that when we return to do inspection before summer we reevaluate charge due to proper charging should be done in ac mode. All is now heating home as designed

Sold new 4 ton carrier 15 SEER2 Heat pump Will be moving system into garage on large insulated stand Will be replacing all duct work and leaving boot boxes One duct run will not be connected or ran until new room is built Will be adding new 20x20 return Electrical will be ran by green light Client will be calling in the next couple days to pay deposit by cc

Brennan G Today I visited to preform maintenance on the trane central system and the daikin mini split. Both systems are clean and all electrical components are within specs. I sprayed the evaporator coils with non rinse cleaner and cleaned the minisplit filters. Both systems are operating normally at this time. The filters for the trane system are 18x20x1

Brennan G Today I visited and preformed maintenance on both systems. I also added remaining charge into the downstairs system. All the equipment is working properly at this time. I verified the coils are clean and I cleaned both Ptraps. I verified the electrical components are within specs.

10 year parts warranty 1 year Labor warranty 1st year maintenance Permits and inspections Warranty registration Removal and disposal of old equipment and materials All labor and taxes Drain line flush Float switches New thermostat digital New refrigerant lines 3/8 and 3/4 Electric heater kit Supply plenum connection New hurricane pad and tie downs