Trusted AC Repair in Valrico, FL

Task Includes -Installation of 4 ton Carrier Base Heat Pump system -Connecting to existing copper Lineset, drain, and electrical -10 year parts 1 year Mason Air warranty -All permits and inspections included

Task Includes -Installation of 4 Ton Carrier 2 Stage Heat Pump System -Installation of 11 supply air duct -(2) of the supply ducts in back bedrooms will be upsized (vent included) -Installation of new supply plenum -Adding a remote return on other side of home -10 year parts 1 year labor warranty -All permits and inspections included

Arrived to find unit not cooling. Tested system to find shorted compressor. Client stated they had a power outage and issues then began. Gave estimate for new system

Found bad blower motor intermittently running. Got system to stay running long enough to verify system was also low on r-22. Advised replacement due to age and cost of repairs. Client had concerns of air flow issues to other side of home and determined systems duct work was undersized for those rooms and for that portion of the home. Will need to upsize system to a 4 ton and add a remote return to the other side of home where it’s not cooling well. Client put down a 5,000$ deposits via CC approval by Shawn. Remaining balance will be due after completion of work!

Performed tune up on system, cleaned coils and interior of air handler, cleaned drain line, checked systems refrigerant pressures and temperatures, checked capacitor, verified all major and minor electrical components are working properly. Amps for compressor are over the rated amount for start up, found biological growth in air handler, there were no surge protectors on indoor or outdoor unit. Provided client solutions for these issues and client needs to talk to spouse. Client renewed annual membership.

Upstairs unit is not cooling, did a complete evaluation of AC system. Found refrigerant pressure is low which means there’s a leak in the system. Did a complementary electronic leak search and could not find where leak is coming from. Also contactor is burnt annd pitted and compressor has high startup amps. Recommended doing a leak search with UV dye and adding 3 pounds of R410 a refrigerant, replacing contactor, And installing a hard start kit to reduce compressor amps, however, system is 8 years old and recommended replacing due to age and cost of repairs. Client needs to discuss with wife overnight and will get back to us.

Brennan G Today I visited for a system maintenance. I tested the equipment in heating mode. The system is clean and all of the electrical components are within specs. I replaced the media filter and verified the drain line is clear. The condenser and evap coils are clean. The equipment is operating normally at this time

Brennan G Today I returned to preform the previously quoted repairs. I replaced the condenser fan motor and installed a sure switch relay. The system is now working normally.

Brennan G Today I visited for the system not cooling. I discovered the contactor relay and condenser fan motor had failed. I scheduled a return visit for tomorrow to preform repairs.

Brennan G Today I visited foe the system making a noise. Was unable to confirm exactly what kind of noise the system was making, however I discovered the drain line was clogged. I suspect that may have had something to do with the condenser turning off abruptly and making a noise. I cleared the drain as a courtesy.

Brennan G Today I returned for one of the systems drain clogged. I discovered i had not actually cleared the drain on my maintenance visit. The drain was behind the fence out of veiw. I cleared the line and we enrolled the systems Into our maintenance agreement.

Brennan G Today I visited for the system not cooling. I discovered the condensate line was clogged. I cleared the line with approval from Dale, the system is now cooling normally. I emailed Dale the invoice for payment.

Brennan G Today I visited for maintenance on both systems. System#1 3ton Ac with Furnace 2006. R22 The system is cooling at this time however we discovered many concerns with this ystem. System#2 2.5ton heatpump 2006 r22. The system is cooling at this time however we discovered the emergency pan is filled with water and is begging to leak. Also we found many other concerns regarding the systems overall condition. Repairs are not recommended to either system due to age, repair cost, both systems use r22. We discussed system replacement and returning for estimates. We scheduled a follow up visit for estimates tomorrow 2-4

Service Call

Performed system maintenance. Found equipment and all small parts operating to manufacturer specs at this time. Suggest to keep up with the regular maintenance.

Maintenance

Performed system maintenance. Found media filter due for replacement. Equipment and all small parts operating to manufacturer specs at this time. Suggest keep up with the regular maintenance. Provided option to renew membership

Found Dual Run Capacitor to be operating significantly below recommended range. Suggested customer replaces part

Maintenance

Performed system maintenance. Found dual run capacitor to be operating significantly below recommended range. Suggested customer replaces part.

Performed system maintenance. Found suction line insulation deteriorated suggest re insulating accessible portion near condenser. Refrigerant just under perfect operating pressures. System target sub cooling is operating at 4° with a target of 10°

Estimate

Maintenance

Disconnect was pulled at condenser.

Performed system maintenance. Found equipment and all small parts operating to manufacturer specs at this time. Suggest keeping up with the regular maintenance.