Quick & Reliable AC Repair in Pinellas Park, FL

Change out blower motor unit is up and cooling homeowner paid cash took a photo of what he gave me and then I changed out the difference

Need to call carrier to get a blower motor and can’t do anything at the moment because carrier is closed. Blower motor is seized up.

Diagnostic completed. Found condenser not activating when called. Compressor and fan motor both buzzing and hot to touch. Removed high voltage and inspected controls. Found hermetic capacitor swollen and testing at 0ufd. Component failed. Recommend collect client replace component and begin maintenance program to provide regular inspections and testing of HVAC and other systems. Discussed options for adding additional properties client owns to maintenance program. Client chose to repair system and enroll in maintenance plan. Repair completed and system cooking. Balance collected via cc.

@Quiara Van Duzen @Peter Spoto @James Renfroe Gary Eidwell 9050 53rd Way Pinellas Park, FL 33782 Install date 09/10/2025 Vertical in the garage 3 ton carrier hp Air handler: FJ4DNXB36 Condenser: GH5SAN43600A 10 kw heater Keep media filter 3 Ton Carrier 14.3 SEER2 Heat Pump Hurricane straps Locking caps Thermostat Electric heater Float switch 10 year part warranty 1 year labor warranty Customer paid in full with check check number 1078 Job total $9800

Did a free estimate for a homeowner got a lot of pictures of the ducks homeowner is getting multiple quotes. They’re gonna make a decision by Friday.

No cooling, we were just out here and determined that system was very low on refrigerant. Client wanted an estimate to replace system. Gave client options to replace, client will be making the decision by Thursday this week.

Client getting odor coming from vents. Explain to client that we will have to come back with a camera to do a ductwork inspection. Explained to client that there will be a charge to inspect ductwork unless issue was caused by installation.

Found capacitor for indoor equipment fan complety failed. This caused the equipment to freeze up. Replaced part and system is operating at this time. Outdoor equipment in Nortek 2021, indoor Goodman 2014

Water leaking from air handler, checked drain line, drain is draining fine and is not backed up. Issue was that static pressure is high due to dirty air filter and too thick of air filter. Client is currently using a Merv 11 air filter and should put a Merv five in there to reduce static pressure in the system. Also condenser coil is dirty and condenser fan is over amping. Replaced air filter for client and advised to switch to a lower Merv rated filter. Also client approved to have condenser coil cleaned, however, needs to talk with spouse about any other recommendations made. System is nine years old and recommended replacing due to age and cost of repairs. Period system is running and operating OK at this time.

Low volt really bad outside Cap on way out, condenser comes on sometimes, when i arrived was was working Needed to remove schedule on the thermostat Reprogram thermostat Replace cap Low volt outside fix James friend, is not available at the moment due to meetings, send link for payment please No email on file James returned for lack of air flow Found flat roof home with no access to duct work and spare bedrooms, kitchen, and living room with lack of flow. Found blower speed tap on low. Increased to high speed to gain more flow and advised client to purchase new high flow grills for kitchen area to gain better control of air movement from vent the kitchen has a 3 way grill and is forcing air to ceiling. Relocated condensate pump for access to filter due to return air filter only has a piece of flex laying behind it and is actually too small for the size system it has in it. There is no safety’s for water over flow as well. Hopefully these adjustments will improve the air in home

Condenser breaker tripping. High voltage grounded between breaker panel and disconnect. No fault of HVAC equipment, send electrician.

System critically low on refrigerant after recharge yesterday by third party. System has been inoperable for over a year. Provided estimate for leak search but advised that without warranty repair cost will be significant. Recommend replacing equipment.

Diagnostic completed. 2011 R-22 system only producing 13° delta. Refrigerant levels below expected range. Return plenum undersized and deteriorating. Recommend against attempting repairs, replacement system is only long term solution. Provided estimate for system replacement for client to consider.

Came out for machine maintenance upon arrival found 5 inch media filter completely caked with dust causing machine to sweat a bunch which led to growth throwing inside of the machine recommended customer getting a polling clean because the under part of the drain pan has a bunch of growth on it so to fully take care of cleaning it we need to remove the coil and put a UV light in there for preventative maintenance Upon collecting payment, customer had to return to work within about a minute and a half so I need to call back today at 7:30 to get it scheduled

Performed an inspection of AC system. Noticed condenser coil compromised from paint that was sprayed on condenser coil from painters that were painting the side of building. Gave client options to correct issue. Client is going to present options to the painting company and will get back to us when issue is resolved.

Upon arrival, the husband was on the side of the house, changing the capacitor and cleaning out the coils. I guess the drain line possibly was clogged. The homeowner does not need us to do any type of service.

Diagnostic completed. On arrival found thermostat blank. Inspected AHU and found condensate filling drain line and flood switch. Contacted Jon and recommended enrollment in maintenance program to cover today's flush and provide regular services to equipment. Client accepted. Flushed line and reactivated system, which produced 17° temperature drop. Balance collected via cc. First HVAC maintenance to be scheduled for October.

Vertical install with an electrical whip

Came out for an estimate upon arrival customer had ideas of what she would like. She wanted a 15.2 seer heat pump system, which would be transitioning from her original 14 seer straight cool system. Also we would be adding a piece of insulation on her addict patch need to get back with customer after she takes her mom to a haircut to finish up with the quote And she would like to go over all the options of machines that we have center she would like me to return to be able to figure things out and get it scheduled

Found bad capacitor compressor not starting. After replacing part found equipment slightly under charged. Added approximately 2 lbs 410a.

Cleaned all flex ductwork and sanitized system through the supply plenum

First looked at system that was just installed and returned. Duct is not supported and is hanging down slightly. Scheduled with office to have installers come back to hang return duct and seal. 2nd client wanted to have other AC system looked at. Determined that system needs several repairs as well as completely empty of refrigerant. System is very old and uses old R 22 refrigerant. Client would have to replace system. Gave client 2 options for system replacement. Email client estimates, client was in meeting at time and will call us back after he looks over both estimates.

Replaced blower motor. Customer was asking why it wasn't reaching temps so we checked the freon levels and discovered the sub cool was below recommended level. Added 454B to reach the recommended level of 10 SC. Discovered he also needs a Tstat wore ran to condenser

Client requests leak search performed. Recharged system and performed leak search. Found audible leak at evaporator coil. Documented with video. Provided estimate for evaporator replacement and discussed replacement options. Client wishes to discuss with daughter before moving forward. Balance for leak search collected via cc, no further action necessary.

Arrived to find float switch in upright position. Made client aware it needs to be level so if the water level raises it will turn system off. Also found the drain pan inside the system was completely filled with sludge. Drain line also had visible signs of sludge. Made client aware of this issues and cleaned all out and poured cleaner in drain pan and line. Flushed with gallon of water and allowed system to run for over 30 mins to assure no dripping of water and proper flow out of system. Made client aware of this proceeds to happen with king a week or 2 time a condensate pump will be necessary